User's Manual

Table Of Contents

SiFLEX02 TRANSCEIVER MODULE

MODULE USER’S GUIDE

5.6 Compatibility

Not all ModFLEX modules have the same antenna options. To use the modules

interchangeably on a carrier board, the designs outlined below must be employed.

Option 1: The carrier board should be designed so the module overhangs the edge of

the board 0.23” as pictured below.

Figure 17 Overhang the Module (dimensions in inches)

Option 2: Design an opening in the carrier board. A minimum opening is shown below.

Figure 18 Opening in the carrier board.

The information in this document is subject to change without notice.

Confirm the data is current by downloading the latest revision from www.lsr.com.