User's Manual

LoRa/BLE Modules
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
39
© Copyright 2016 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Examples of LL components that can be combined into a new design are:
Listing reference
Design Name
Core Spec Version
TBD
nRF51xxx stack: S110 link layer
4.0
TBD
Sx20_nRF51xxx link layer
4.1
TBD
S130_nRF51xxx link layer
4.2
*Note: Please check with Laird/Nordic for applicable LL components.
Examples of Host Stack components that can be integrated into the new design are;
Listing reference
Design Name
Core Spec Version
TBD
nRF51xxx stack: S110 host layer
4.0
TBD
Sx20_nRF51xxx host layer
4.1
TBD
S130_nRF51xxx host layer
4.2
*Note: You may choose any Host Stack and optional profiles in you design.
If the design incorporates any standard SIG LE profiles (such as Heart Rate Profile, refer to section, External to
the Core - Current and Qualifiable GATT-based Profile and Service Test Requirements), it is necessary to test
these profiles using PTS or other tools where permitted; the results are added to the compliance folder.
You are required to upload your test declaration and test reports (where applicable) and complete the final
listing steps on the SIG website. Remember to purchase your Declaration ID before you start the qualification
process; you cannot complete the listing without it.
To start a listing, go to: https://www.bluetooth.org/tpg/QLI_SDoc.cfm. In step 1, select the option, New Listing,
(without referencing a Qualified Design).
Additional Assistance
Please contact your local sales representative or our support team for further assistance:
Laird Technologies Connectivity Products Business Unit
Support Centre: http://ews-support.lairdtech.com
Email: [e-mail]
Phone: Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Web: http://www.lairdtech.com/bluetooth