User Manual

ProFLEX01 TRANSCEIVER MODULE
MODULE USER’S GUIDE
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
330-0003-R2.1 Copyright © 2009-2010 LS Research, LLC Page 5 of 17
2.3 Setting Compliance Limits When Using Host Software
To maintain compliance with FCC band edge spectrum limits the output power must be
reduced on some channels. Refer to
Table 2 below for setting up the proper compliance limits.
RF Channel
Max LSR Host RF Power
Value
AT86RF212 TX_PWR
Register Value
RF Output Power
11 15 0x0F 24 dBm
12 15 0x0F 24 dBm
13 15 0x0F 24 dBm
14 15 0x0F 24 dBm
15 15 0x0F 24 dBm
16 15 0x0F 24 dBm
17 15 0x0F 24 dBm
18 15 0x0F 24 dBm
19 15 0x0F 24 dBm
20 15 0x0F 24 dBm
21 15 0x0F 24 dBm
22 15 0x0F 24 dBm
23 15 0x0F 24 dBm
24 15 0x0F 24 dBm
25 5 0x05 19 dBm
26 Not used Not used Not used
Table 2 Compliance Limits