User's Guide

PRO-FLEX TRANSCEIVER MODULES
USER’S GUIDE
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
PFLX-UG-0002-00-17 Copyright © 2009 LS Research, LLC Page 8 of 29
Figure 3 Receiver PERT Tab
2.6.2 Transmitter Setup
Setup a board as a transmitter with these setting, for example, as shown in Figure 4:
 Short Address: 100
 Pan ID: 111
 RF Channel: 20
 Tx Power: 0