User's Guide

PRO-FLEX TRANSCEIVER MODULES

USER’S GUIDE

The information in this document is subject to change without notice.

Confirm the data is current by downloading the latest revision from www.lsr.com.

INDUSTRY CANADA STATEMENTS

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

To reduce potential radio interference to other users, the antenna type and its gain

should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more

than that permitted for successful communication.

This device has been designed to operate with the antennas listed below

, and having a

maximum gain of 2.0 dBi. Antennas not included in this list or having a gain greater than

2.0 dBi are strictly prohibited for use with this device. The required antenna impedance is

50 ohms.

Approved Antennas

Nearson DiPole # S131CL-L-PX-2450S

Inverted F Trace

To comply with IC RF exposure limits for general population/uncontrolled exposure, the

antenna(s) used for this transmitter must be installed to provide a separation distance of

at least 20 cm from all persons and must not be collocated or operating in conjunction

with any other antenna or transmitter.