User's Guide

PRO-FLEX TRANSCEIVER MODULES

USER’S GUIDE

The information in this document is subject to change without notice.

Confirm the data is current by downloading the latest revision from www.lsr.com.

5.3 In-House Programming

For programming prototypes in-house, either Embedded Workbench for MSP430 from

IAR Systems or FET-Pro430 from Elprotronic (www.elprotronic.com) can be used.

Detailed instructions for programming your module with Embedded Workbench for

MSP430 or FET-Pro430 can be found in their respective User’s Guides.

5.4 Production Programming

In place of the MSP-FET430UIF, Texas Instruments recommends using their MSP-

GANG430 programmer, see Figure 14, for production programming. This device allows

for programming of up to eight devices simultaneously. Additional details regarding the

MSP430 Gang Programmer can be found on the Texas Instruments website

(www.ti.com).

Figure 14 MSP430 Gang Programmer