User's Guide

PRO-FLEX TRANSCEIVER MODULES

USER’S GUIDE

The information in this document is subject to change without notice.

Confirm the data is current by downloading the latest revision from www.lsr.com.

Figure 12 Sensor Network Adapter

5.1.5 TI SmartRF Protocol Packet Sniffer

The TI SmartRF Protocol Packet Sniffer is a free IEEE 802.15.4 packet sniffer, that can

be used with any CC24xx or CC25xx development kit from Texas Instruments. The

Packet Sniffer is a PC software application used to display and store RF packets

captured with a listening RF Device. The RF Device is connected to the PC with an USB

cable. Various RF protocols are supported. The Packet Sniffer filters and decodes

packets and displays them in a convenient way, with options for filtering and storage to a

binary file format.

5.2 Debugging

When your custom firmware is ready for debugging, connect the MSP-FET430UIF to the

ModFLEX development board fitted with a Pro-FLEX series transceiver module. From

the Project menu, select Debug, or, alternatively, click the Debugger button in the IAR

Embedded Workbench toolbar. See the MSP430 IAR Embedded Workbench® IDE

User Guide for additional details. This document can be found through the Help menu of

Embedded Workbench, after it is installed on your machine.

Figure 13 Debugging Pro-FLEX Custom Firmware via MSP-FET430UIF

http://focus.ti.com/docs/toolsw/folders/print/packet-sniffer.html