User Manual

PRO-FLEX SERIES TRANSCEIVER MODULES

HOST PROTOCOL GUIDE

The information in this document is subject to change without notice.

Confirm the data is current by downloading the latest revision of this document from www.lsr.com.

1 Introduction

1.1 Purpose & Scope

The purpose of this document is to describe in detail the message protocol used

to communicate between a Host Device and the RF Module microprocessor.

1.2 Audience

This document is intended to be read by engineers and technical management.

A general knowledge of common engineering practices is assumed.

1.3 Applicable Documents

The reader should be familiar with the following documentation:

 ProFLEX-01 Datasheet

1.4 Revision History

Date Change Description Revision

Initial release. 1.0

Table 1 Revision History