Users Manual Part 1

45
Nerve Integrity Monitor
Other sounds
You may hear the following additional sounds from the NIM Vital system:
• Monitoring on/o sound. The two tone bo beep monitoring on sound occurs anytime monitoring is turned on such as going
into monitoring from setup or closing the electrode check panel. The two tone be boop monitoring o sound occurs anytime
monitoring is turned o such as returning to setup from monitoring or opening the electrode check panel.
• Incrementing probe clicks. When using the incrementing probe buttons, a click can be heard to indicate that you pressed a
probe button.
Powering down the NIM Vital system
1. Press and select Shut down from the menu, or briey touch the white illuminated power button.
A system message appears giving you information about the patient interface box and conrms shutdown.
2. Place the patient interfaces box(es) into the cradle(s) located in the back of the NIM Vital system ensuring the patient interface
box lights appear.
3. Wait for the system to complete its power down.
4. Remove the power cord from the supply receptacle to disconnect the equipment from the power.
Note: If the system alerts the user with a warning message indicating there is not enough power in the console battery, use Mains
power to charge the patient interface box batteries. All stored case data (snapshots) is lost when the unit is powered o.
Visual error and informational messages
The NIM Vital system has user-friendly notications and informational messages. It informs the user of the issue and available actions
to take. The following notications and informational message may appear:
• About
• Active Stim Only
• Advanced Settings
• Case Conrmation
• Congure Case Information
• Console Battery 1
• Console Battery 2
• Console Battery 3
• Console Battery 4
• Critical Battery
• Current Warning Level APS
• Current Warning Level
• Date Time
• Delete Prole
• Disk Space 1
• Disk Space 2
• Drive Not Found
• Edit Snapshot
• Edit Trend
• EMG Recording Failed
• End Case
• Event Threshold
• Exit Trend
• Expanded Report
• Flat Line
• Help
• High Stim
• Impedance Check 1
• Impedance Check 2
• Internal Error 1
• Internal Error 2
• Low Battery
• Low Current
• Maintenance
• Module DSP Error
• ModuleErrorDialog
• Monitoring Disabled EC
• Monitoring Disabled ESU
• Monitoring Disabled Patient Interface
• New Baseline
• New Prole
• Overcurrent
• Overwrite Quicktag
• Patient Interface Charging Failure
• Patient Interface Switch 1
• Patient Interface Switch 2
• Patient Interface Switch 3
• Patient Interface Switch 4
• Record Data
• Save High Stim
• Self Test 1
• Shut Down
• Skip Patient Interface Connection
• Snapshot Comment
• Stim Probe
• Title Comment
• Trend Recording Failed
• Planned Maintenance
FCC use only, not for Medical use