Users Manual Part 1

26
Nerve Integrity Monitor
Connected devices
The user views the status of connected devices using . The Connected Devices panel provides detailed information on any
connected patient interface whether it is docked, wirelessly connected, or wired.
Settings overview
Settings/Advanced settings adjustments made in the MONITORING mode lasts for the duration of the session unless the user
presses [Save Prole] which saves the changes in a prole.
Global settings
Press to access the Global Settings menu on any screens.
1
2
3
4
5
6
7
1 Global Settings screen.
2 Case panel. Press [End case] to end the current case and return to the Select Proles
screen.
3 Information panel. Access the following screens:
• About
• Help
4 USB panel (appears when the system detects an approved, mounted USB drive). Press
[Unmount USB drive] to safely remove the USB drive.
5 Power options panel. Press [Shut down] to shut down the NIM Vital system.
6 Select a Language drop-down menu.
7 Close the Global settings panel.
Accessing settings
The user can only access/modify these settings from the MONITORING tab.
1. Press .
The Settings slider panel buttons appear (for example: ).
2. Select one of the following settings you want to adjust:
• Nervassure (available only in Nervassure procedures)
• NerveTrend (available when enabled in select procedures).
• Audio.
• Display.
• Stimulation.
• Titles and Comments
The panel slides out enabling you to make the adjustments.
Note: to open any Advanced Settings panel, the user must accept a dialog box that warns her/him about modifying advanced
settings.
Nervassure settings panel
Refer to the “Nervassure settings” topic for additional information on Nervassure settings.
FCC use only, not for Medical use