Users Manual Part 1

33
Nerve Integrity Monitor
• Select [New] to create a custom title/comment. Use the on-screen or attached keyboard to type a title or comment.
• Select a title, press [Edit] and then edit the existing title.
• Select a title, press selected item is a Quick Tag title toggle. See the “Quick Tags” topic for more information.
• Select a title, press [Delete]. The system deletes the title. This option is not available if the title is a quick tag that has already
been used during the procedure.
4. Press to close the settings panel.
Optional features in monitoring
Quick tags
You can use the Enable Quick Tags toggle slider to display the abbreviation of the title that appears on a quick tag button on the tool
bar at the right of the screen during the Monitoring phase. You can activate a quick tag by selecting a title and then select “Selected
item is a Quick Tag title” toggle. Type an abbreviation for the title of the button using the pop-up that appears.
1. Select the Enable Quick Tags toggle slider.
2. Select the Selected item is a Quick Tag title toggle slider.
The Edit Title/Comment Abbreviation pop up appears with the title/comment name in the Title/Comment box.
3. Press the Abbreviation box.
The Abbreviation pop up appears with the choice to use an on screen keyboard, or use your attached keyboard.
4. Type the abbreviation you want to use for your quick tag and press [CONFIRM].
Note: the system adds new titles to the end of the quick tag list.
Probe-based functions
The (single use) Incrementing Probe provides the surgeon with the means to adjust the stimulation current at surgical site.
1
2 3
4
1 - Toggle button normal or at rest.
2 - Increase current.
3 - Decrease current.
4 - The user can perform the following functions with the toggle button:
• Momentary press saves a snapshot of the current screen to memory (for reports) and to a selected peripheral device (printer
and/or USB ash drive) if the user selected that option in the settings area.
• Press and hold opens a menu on the user interface with more options.
Control stimulation and volume using the probe.
By default, the plus/minus buttons control stimulation values and annunciate the newly set stimulation current. There are two
methods the user can use to toggle between stimulation and volume controls.
Method 1
1. Press the plus button for two seconds.
The probe’s plus/minus positions now control volume and provides audio feedback of the volume level.
2. When in the volume mode, press the plus button for an additional two seconds.
The probe’s plus/minus positions now control stimulation. If the probe is in volume mode, after 30 seconds of no use it defaults
back to stimulation control.
Method 2
1. Press the toggle button for two seconds.
A menu appears.
2. Use the plus/minus positions to navigate through the menu options and select [Volume].
The probe’s plus/minus positions now control volume and provide audio feedback of the volume level.
3. Press the toggle button for two seconds.
A menu appears.
FCC use only, not for Medical use