User's Manual

MSD50NBT
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
29
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
 In order to get maximum throughput when operate at MIMO 2x2, two antennas with at least 25dB isolation
is recommended.
 To avoid negatively impacting TX power and receiver sensitivity, do no cover the antennas with metallic
objects or components.
 Opening/handing/removing must be done on an anti-ESD treated workbench.
All workers must also have undergone anti-ESD treatment.
 The devices should be mounted within one year of the date of delivery.
REGULATORY
Certified Antennas
Model
Type
Connector
2400~2483.5MHz
5150~5250MHz 5250~5350MHz
5470~5725MHz 5725~5850MHz
Laird MAF94051
Dipole
RP-SMA
2.1 dBi (2.4-2.5 GHz), 2.4 dBi (4.9 GHz)
2.6 dBi (5.25 GHz), 3.4 dBi (5.875 GHz)
Laird/NanoBlade-IP04
PCB
Dipole
IPEX MHF
2 dBi (2.4-2.5 GHz),
3.9 dBi (5.15-5.35 GHz), 4 dBi (5.6 GHz)
Laird/MAF95310 Mini Nano Blade
Flex
PCB
Dipole
IPEX MHF
2.79 dBi (2.4 GHz), 3.38 dBi (5 GHz)
Laird/NanoBlue-IP04
PCB
Dipole
IPEX MHF
2 dBi (2.4 GHz only)
Ethertronics/WLAN_1000146
Isolated
Magnetic
Dipole
IPEX MHF
2.5 dBi (2.390-2.490 GHz),
3.5 dBi (4.900-5.100, 5.150-5.350,
5.70-5.900 GHz)
FCC AND INDUSTRY CANADA REGULATORY
Model
US/FCC
CANADA/IC
MSD50NBT
SQG-MSD50NBT
3147A-MSD50NBT
The MSD50NBT has been designed to pass certification with the antenna listed below. The required antenna
impedance is 50 ohms.
Model
Type
Connector
Peak gain ( dBi )
2400~2483.5
MHz
5150~5250
MHz
5250~5350
MHz
5470~5725
MHz
5725~5850
MHz
Laird
MAF94051
Dipole
RP-SMA
2.1 dBi
2.4 dBi
2.6 dBi
3.4 dBi
Laird
NanoBlade-IP04
PCB Dipole
IPEX MHF
2 dBi
3.9 dBi
4 dBi
Laird
MAF95310 Mini
NanoBlade Flex
PCB Dipole
IPEX MHF
2.79 dBi
3.38 dBi