User Manual

25
4.2.9 I/O Control (See Figure 4-7)
The I/O Control page can be accessed by clicking the I/O Control tab in the
software, and is shown in Figure 4-7. The I/O Control page can be used to
read analog and digital inputs and set digital outputs.
Figure 4-7. I/O Control
Digital I/O
• Set Output – Sets pins configured as digital outputs to the selected
level (0 or 1).
• Query Input – Gets the input level (0 or 1) for pins configured as
digital inputs.
Analog Inputs
• Readings – Displays analog input values (upper text boxes) and the
calculated voltage (lower text boxes) read by the microcontroller for
pins configured as analog inputs. The analog readings and
calculated voltages are based on the settings in the Analog Config
tab (Section 4.2.8).