User's Manual

Enhanced Class 1 Bluetooth v2.1 Module
User’s Guide
Americas: [phone] Option 2
Europe: [phone]
Hong Kong: [phone]
www.lairdtech.com/wireless
63
CONN-GUIDE-BT740_v0.2
Response Packet
Offset
Field
Value
Comments
7
SECMODE
12..15
12 = SSP +
IO_CAP_NO_INPUT_NO_OUTPUT
13 = SSP + IO_CAP_DISPLAY_YES_NO
14 = SSP + IO_CAP_KEYBOARD_ONLY
15 = SSP + IO_CAP_DISPLAY_ONLY
Note 1: SECMODE is now driven by the Simple Secure Pairing procedure included in and after v.2.1
of the BT specification.
Note 2: For SECMODE, the No I/O Capability option is equivalent to the ‘Just Works’ scenario in SSP.
Note 3: When this module interacts with a pre-2.1 device, it is unconditionally forced into legacy
pairing mode.
Note 4: Laird recommends that the reader become familiar with the SSP concept introduced in all
subsequent version of BT (post v2.1). The best introduction is to Google the phrase Bluetooth
Simple Secure Pairing.
Note 5: Contact Laird for an informal discussion if necessary.
8.9.3 Read Local Bluetooth Address
This command reads the Bluetooth address of the module.
Command Packet
Offset
Field
Value
Comments
0
LENGTH
4
Fixed
1
CHANNEL
0
Fixed
2
COMMAND
[CMD_READ_BLUETOOTH_ADDRESS]
3
FLOW_IN
??
Runtime value
Response Packet
Offset
Field
Value
Comments
0
LENGTH
11
Fixed
1
CHANNEL
0
Fixed
2
COMMAND
[CMD_READ_BLUETOOTH_ADDRE
SS]
3
FLOW_OU
T
??
Runtime value
4
STATUS
[OK]