User's Manual

Enhanced Class 1 Bluetooth v2.1 Module
User’s Guide
Americas: [phone] Option 2
Europe: [phone]
Hong Kong: [phone]
www.lairdtech.com/wireless
29
CONN-GUIDE-BT740_v0.2
5.3.40 Disable Connectable And Discoverable Mode
Command:
AT+BTX
Response:
<cr,lf>OK<cr,lf>
Or
<cr,lf>ERROR nn<cr,lf>
Description:
Disable page/inquiry scanning. This means it does not accept incoming connections or
inquiry requests. More specifically it negates the effect of AT+BTQ, AT+BTG and
AT+BTP commands.
Use ATi21 and ATi22 to determine the discoverable and connectable modes at any
time.
5.3.41 HDP: Associate The Agent With Manager
Command:
AT+HAAhhhh
Response:
<cr,lf>OK<cr,lf>
Or
<cr,lf>ERROR nn<cr,lf>
Description:
This is a Health Device Profile (HDP Agent related command. Refer to Application
Examples for details). Please note ERROR 59 implies that the profile has not been
activated which means bit 2 in S Reg 9003 is not set AND S Reg 9070 is not 0.
‘hhhh’ is obtained as a response to the AT+HAB command.
5.3.42 HDP: Bind Manager to Agent
Command:
AT+HAB<bd_addr>,iiii
Response:
<cr,lf>hhhh<cr,lf>OK<cr,lf>
Or
<cr,lf>ERROR nn<cr,lf>
Description:
This is a Health Device Profile (HDP Agent related command. Refer to Application
Examples for details). Please note ERROR 59 implies that the profile has not been
activated which means bit 2 in S Reg 9003 is not set AND S Reg 9070 is not 0.
‘iiii’ is the nominal code for the data specialization.
5.3.43 HDP: Disassociate The Agent From Manager
Command:
AT+HADhhhh
Response:
<cr,lf>OK<cr,lf>
Or
<cr,lf>ERROR nn<cr,lf>
Description:
This is a Health Device Profile (HDP Agent related command. Refer to Application
Examples for details). Please note ERROR 59 implies that the profile has not been
activated which means bit 2 in S Reg 9003 is not set AND S Reg 9070 is not 0.