User's Manual

Enhanced Class 1 Bluetooth v2.1 Module
User’s Guide
Americas: [phone] Option 2
Europe: [phone]
Hong Kong: [phone]
www.lairdtech.com/wireless
109
CONN-GUIDE-BT740_v0.2
Offset
Field
Value
Comments
0
LENGTH
8
Fixed
1
CHANNEL
0
Fixed
2
COMMAND
[CMD_HDP_SCANREPORT_FIXED]
3
FLOW_OUT
??
Runtime value
4
STATUS
As appropriate
5..6
HANDLE[2]
[4]=msb,[5]=lsb
Echoed back from the command
7
HOSTCONTEXT
XX
This is echoed back from the
command
The host waits until the response receives before submitting further commands.
If the agent is not associated, then this command first results in an association request and if that is
successful the host receives EVT_ASSOCIATED which contains the config ID of the MDS configuration
that was negotiated and the system ID of the peer. See EVT_ASSOCIATED for further details.
If the agent is already associated, then there is a response as soon as there is acknowledgement from
the manager that the scan report was received.
If association was not successful, because for example the manager is not in range or the Bluetooth
device specified in CMD_HDP_BIND does not offer HDP services, then the EVT_DISASSOCIATED
sends to the host prior to the response message. This is shown in the message sequence diagram below
(Figure 8-18).