User's Manual

Class 1 Bluetooth v2.0 Module
User’s Guide
Americas: [phone] Option 2
Europe: [phone]
Hong Kong: [phone]
www.lairdtech.com/bluetooth
93
CONN-GUIDE-BT730_v0.9
12. CE REGULATORY
The BT730 has been tested for compliance with relevant standards for the EU market. The OEM should
consult with a qualified test house before entering their device into an EU member country to make sure
all regulatory requirements have been met for their complete device.
The BT730 was tested with a 2dBi dipole antenna. The OEM is free to use any manufacturer’s antenna
and type of antenna but it must be <2dBi to remain in compliance with the Laird reports.
Reference the Declaration of Conformities listed below for a full list of the standards that the modules
were tested to. Test reports are available upon request.
13. EU DECLARATIONS OF CONFORMITY
13.1 BT730-SA
Manufacturer:
Laird Technologies
Product:
BT730-SA
EU Directive:
RTTE 1995/5/EC
Conformity Assessment:
Annex IV
Reference standards used for presumption of conformity:
Article
Number:
Requirement
Reference standard(s):
3.1a
Health and Safety
EN 60950-1:2006
3.1b
Protection requirements with
respect to electromagnetic
compatibility
EN 301 489-1 V1.8.1
EN 301 489-17 V2.1.1
Emissions:
EN55022:2006/A1:2000/A2:2006(Cla
ssB)
Immunity:
EN61000-4-2:1995/A1:1998/A2:2001
EN61000-4-3:2002/A1:2002
3.2
Means of the efficient use of
EN 300 328 V1.7.1 (2006-10)