User's Manual
Table Of Contents
- 1 Overview and Key Features
- 2 Specification
- 2.1 Specification Summary
- 3 Hardware Specifications
- 3.3.4 OTA (Over-the-Air) smartBASIC Application Download
- 4 Power Consumption
- 5 Functional Description
- 5.1 Power Management (includes Brown-out and Power on Reset)
- 5.2 Clocks and Timers
- 5.3 Memory for smartBASIC Application Code
- 5.4 Radio Frequency (RF)
- 5.5 NFC
- 5.6 UART Interface
- 5.7 SPI Bus
- 5.8 I2C Interface
- 5.9 General Purpose I/O, ADC, PWM and FREQ
- 5.10 nRESET pin
- 5.11 nAutoRUN pin
- 5.12 vSP Command Mode
- 5.13 Two-wire Interface JTAG
- 5.14 BL652 Wakeup
- 5.15 Low Power Modes
- 5.16 Temperature Sensor
- 5.17 Random Number Generator
- 5.18 AES Encryption/Decryption
- 5.19 Optional External Serial (SPI) Flash
- 5.20 Optional External 32.768 kHz crystal
- 5.21 BL652-SA On-board Chip Antenna Characteristics
- 6 Hardware Integration Suggestions
- 7 Mechanical Details
- 8 Application Note for Surface Mount Modules
- 9 FCC and IC Regulatory Statements
- 10 Japan (MIC) Regulatory
- 11 CE Regulatory
- 12 EU Declarations of Conformity
- 13 Ordering Information
- 14 Bluetooth SIG Qualification
BL652
Datasheet
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
53
© Copyright 2016 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Note 4
Ensure that there is no exposed copper under the module on the host PCB.
Note 5
You may modify the PCB land pattern dimensions based on their experience and/or process
capability.
8 APPLICATION NOTE FOR SURFACE MOUNT MODULES
Introduction
Laird Technologies surface mount modules are designed to conform to all major manufacturing guidelines. This
application note is intended to provide additional guidance beyond the information that is presented in the User
Manual. This Application Note is considered a living document and will be updated as new information is
presented.
The modules are designed to meet the needs of a number of commercial and industrial applications. They are
easy to manufacture and conform to current automated manufacturing processes.
Shipping
8.2.1 Tape and Reel Package Information
Note: Ordering information for tape and reel packaging involves the addition of T/R to the end of the full
module part number. For example, BL652-SA-0x becomes BL652-SA-0x-T/R.
Figure 12: Reel specifications