User Manual

Page 3 of 3
OEM Responsibility to the FCC Rules and Regulations
The Apex LT Module has been certified per FCC Part 15 rules for integration into products
without further testing or certification. To fulfill the FCC certification requirements the OEM of the
Apex LT Module must ensure that the information provided on the Apex LT Label is placed on
the outside of the final product.
The Apex LT Module is labeled with its own FCC ID Number. If the FCC ID is not visible when the
module is installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label can use
wording such as the following:
“Contains Transmitter Module FCC ID: TFB-APEXLT”
or
“Contains FCC ID: TFB-APEXLT”
The OEM of the Apex LT Module must only use the approved antenna, which has been certified
with this module.
The OEM of the Apex LT Module must test their final product configuration to comply with
Unintentional Radiator Limits before declaring FCC compliance per Part 15 of the FCC
rules