User's Manual

60-2230C
Datasheet
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
35
© Copyright 2017 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
14. M ECHANICAL S PECIFICATIONS
Module dimensions of 60-2230C are 22mm x 30mm x 3.3mm. Detail drawings are shown in Error! Reference
source not found..
Figure 8: Module dimension of 60-2230C
Note: The Wi-Fi MAC address is located on the product label. The BT MAC address is always numerically
subsequent to the Wi-Fi MAC address. Therefore, the BT MAC address is the Wi-Fi MAC address
plus one.
15. MOUNTING
The 60-2230C connects to the host via a standard PCI EXPRESS M2 connector. The Kyocera’s (www.Kyocera-
connector.com) 6411 series provide 1.8 mm, 2.3 mm and 3.2 mm connector heights.
Because the 60-2230C is a single-side component module, we recommend the following part number (which has
a 2.3 mm connector height): 24-6411-067-101-897E
The stand-off mating to the recommend 2.3 mm connector from EMI STOP (www.EMISTOP.com) is part number
F50M16-041525P1D4M. Detail layout and stencil opening are show in Figure 9.