User's Manual

SU60-SIPT
Datasheet
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
4
© Copyright 2017 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
1 S COPE
This document describes key hardware aspects of the Laird 60-SIPT series system-in-package (SiP) modules
providing either SDIO, USB2.0, or PCIe bus interface for WLAN connection and UART/PCM, SDIO/PCM,
USB2.0/PCM for Bluetooth
®
connection. This document is intended to assist device manufacturers and related
parties with the integration of this radio into their host devices. Data in this document is drawn from several
sources and includes information found in the Marvell 88W8997/88PG823 data sheets issued in April 2016,
along with other documents provided from Marvell.
Note that the information in this document is subject to change. Please contact Laird to obtain the most recent
version of this document.
2 I NTRODUCTION
2.1 General Description
The 60-SIPT series SiP modules are an integrated, small form factor 2x2 MIMO
802.11 a/b/g/n/ac WLAN plus Bluetooth 4.2 dual mode device that is
optimized for low-power mobile devices. The integration of all WLAN and
Bluetooth functionality in a single package supports low cost and simple
implementation along with flexibility for platform-specific customization.
This device is pre-calibrated and integrates the complete transmit/receive RF
paths including band pass filter, diplexer, switches, reference crystal oscillator,
and power manage units (PMU).
The 60-SIPT series device supports IEEE 802.11 ac (wave 2) 2X2 receive multi-
user MIMO (MU-MIMO) spatial stream multiplexing with data rates up to MCS9 (866.7 Mbps). It also supports
Bluetooth 2.1 + EDR and Bluetooth 4.2 (Bluetooth Low Energy or BLE). Internal Wi-Fi and BT coexistence
scheme provides optimized throughput when Wi-Fi and BT working simultaneously. The device’s low power
consumption radio architecture and power manage unit (PMU) proprietary power save technologies allow for
extended battery life.
In addition, its dual 802.11 and Bluetooth radio includes full digital MAC and baseband engines that handle all
802.11 CCK/OFDM® 2.4/5GHz, and Bluetooth basic rate and EDR baseband and protocol processing.
Dual embedded low-power CPU cores minimize host loading and maximize flexibility to support customer-
specific use cases.
The 60-SIPT series SiP modules include two product SKUs which is have different supported software features.
Please check Laird Sales/FAE for further information. Order information is listed in Table 1.
Table 1: Product ordering information
Order Model Description
SU60-SIPT 802.11ac + BT4.2 60 Series hardware combined with Summit Series Enterprise software
ST60-SIPT 802.11ac + BT4.2 60 Series hardware combined with Sterling Series Professional software