User's Manual

SU60-SIPT
Datasheet
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
37
© Copyright 2017 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Pin
#
Name Type
Voltage
Ref.
Description
If Not
Used
67 LED_OUT_BT O, PU VIO LED indicator for BT with 10mA drive capability. N/C
68 LED_OUT_WLAN O, PU VIO LED indicator for WLAN with 10mA drive capability N/C
69-
84
GND - -
Thermal Ground Pad
(Important for RF performance and thermal
dissipation; please flow the reference design)
GND
12 H OST C ONFIGURATION O PTIONS
60-SIPT series support various host configurations for WLAN and BT. Its detail configurations are shown in
following table (Error! Reference source not found.).
Table 34: Wi-Fi host interface configuration table
CONFIG_HOST [2-0] WLAN BT/BLE
Note
000 SDIO UART -
001 SDIO SDIO -
010 PCIe USB 2.0 Initial USB 2.0 PHY and COM PHY PCIe portion
011 PCIe UART Initial only COM PHY PCIe portion
100 USB 2.0 UART Initial USB 2.0 PHY
101 USB 2.0 USB 2.0 Initial only USB 2.0 PHY
13 M ECHANICAL S PECIFICATIONS
Module dimensions of 60-SIPT series is 13 x 14 x 1.87 mm. Detail drawings are shown in Figure 10.
Figure 10: Mechanical drawing - 60-SIPT