User's Manual

SU60-SIPT
Datasheet
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
32
© Copyright 2017 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Symbol Parameter Min. Typ. Max. Unit
Defined at crossover point of
differential data
signals
T JR2
Receiver jitter: for paired transitions
Defined at crossover point of differential data
signals
-9.0 - 9.0 ns
10.3.3 USB HS Driver and Receiver Parameters
Notes: Over full range of values specified in the Recommended Operating Conditions unless otherwise
specified.
The load is 100Ω differential for these parameters, unless other specified.
Table 30: USB HS Driver and Receiver Specifications
Symbol Parameter Min. Typ. Max. Unit
BR Baud rate - 480 - Mbps
BR PPM Baud rate tolerance -500 - 500 ppm
Driver Specifications
V HSOH Data signal high 360 - 440 mV
V HSOL Data signal low -10 - 10 mV
T HSR
Data rise time
Defined from 10% to 90% for raise time and 90% to 10%
for fall time
500 - - ns
T HSF
Data fall time
Defined from 10% to 90% for raise time and 90% to 10%
for fall time
-500 - - ns
Receiver Specifications
V HSCM Input signal ended low -50 - 500 mV