User's Manual

SU60-SIPT
Datasheet
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
20
© Copyright 2017 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Initial Carrier Frequency — +/-5 — ≤±75 KHz
Drift Rate (DH1 package) — 4 — ≤ 20 KHz/50 µs
Drift (DH3 packet) — 8 — ≤25 KHz
Drift (DH5 packet) — 7 — ≤ 40 KHz
Adjacent Channel Power
F≥ ± 3MHz — -50 — < -40 dBm
F = ± 2MHz — -46 — ≤ -20 dBm
F = ± 1MHz — -15 — N/A dBm
Table 17: Enhanced data rate transmitter performance 25°C (3.3V)
Test Parameter Min Typ Max BT Spec. Unit
Relative Transmit Power 5 7 9 dBm
Max Carrier Frequency
Stability |wo|
2-DH5 — 1 —
≤ ±10 KHz
3-DH5 — 1 —
Max Carrier Frequency
Stability |wi|
2-DH5 — 4 —
≤ ±75 KHz
3-DH5 — 4 —
Max Carrier Frequency
Stability |w0+wi|
2-DH5 — 5 —
≤ ±75 KHz
3-DH5 — 5 —
RMS DEVM
2-DH5 — 4 — ≤ 20 %
3-DH5 — 4 — ≤13 %
Peak DEVM
2-DH5 — 9 — ≤ 35 %
3-DH5 — 9 — ≤ 25 %
99% DEVM
2-DH5 — 12 — ≤ 30 %
3-DH5 — 12 — ≤ 20 %
EDR Differential Phase Encoding — 99 — ≥ 99 %
Adjacent Channel Power
F≥ ± 3MHz — TBD — < -40 dBm
F = ± 2MHz — TBD — ≤ -20 dBm
Table 18: Basic rate receiver performance at 3.3V
Test Parameter Min Typ Max BT Spec. Unit
Sensitivity (1DH5) BER ≤ 0.1% — -95 -92 ≤ -70 dBm
Maximum Input BER ≤ 0.1% -20 -10 — ≥ -20 dBm
Carrier-to-Interferer Ratio
(C/I)
Co-Channel — 10 11 11
C/I (± 1 MHz) — -4 0 0 dB
C/I (± 2 MHz) — -45 — -30
dB
C/I (± 3 MHz) — -49 — -40 dB
Maximum Level of Intermodulation Interferers -39 -30 - ≥ -39 dBm