User's Manual

SU60-SIPT
Datasheet
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
16
© Copyright 2017 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
Symbol
(Domain)
Parameter
Max
Rating
Unit
VIO I/O configuration power supply (for 1.8V system)
(for 3.3V system)
2.2
4.0
V
3V3 External 3.3V power supply 4.0 V
Storage Storage Temperature -40 to +85 °C
ANT0; ANT1 Maximum RF input (reference to 50-Ω input) +10 dBm
ESD Electrostatic discharge tolerance 2000 V
8.2 Recommended Operating Conditions
Table 7: Recommended Operating Conditions
Symbol (Domain) Parameter Min Typ Max Unit
VIO_SD WLAN host interface I/O supply 1.62/2.97 1.8/3.3 1.98/3.63 V
VIO WLAN and BT GPIO I/O power supply 1.62/2.97 1.8/3.3 1.98/3.63 V
3V3 External 3.3V power supply 2.97 3.30 3.63 V
T-ambient Ambient temperature -30 25 85 °C
8.3 DC Electrical Characteristics
Table 8 and Table 9 list the general DC electrical characteristics over recommended operating conditions (unless
otherwise specified).
Table 8: General DC electrical characteristics (For 1.8V operation VIO_SD; VIO)
Symbol Parameter Conditions Min Typ Max Unit
VIH High Level Input Voltage -- 1.26 2.2 V
VIL Low Level Input Voltage -- -0.4 0.54 V
VHYS Input Hysteresis -- 100 mV
VOH Output high Voltage -- 1.4 V
VOL Output low Voltage -- 0.4 V
Table 9: General DC electrical characteristics (For 3.3V operation VIO_SD; VIO)
Symbol Parameter Conditions Min Typ Max Unit
VIH High Level Input Voltage -- 2.4 3.6 V
VIL Low Level Input Voltage -- -0.4 0.9 V
VHYS Input Hysteresis -- 100 mV
VOH Output high Voltage -- 2.9 V
VOL Output low Voltage -- 0.4 V
Table 10: DC electrical characteristics for 1.8V or 3.3V operation on special pads (PCIE_WAKEn, PCIE_CLKREQn)
Symbol Parameter Conditions Min Typ Max Unit
VIH High Level Input Voltage -- 1.4 3.6 V
VIL Low Level Input Voltage -- -0.4 0.8 V