Instruction Manual

Sound Level Meter Types 2245 – Instruction Manual Page 9 of 110
Chapter 2
Short Guide to the Sound Level Meter
2.1 Introduction
This chapter contains a brief guide to the use of the sound level meter.
The user interface of the sound level meter is classic:
 A screen for displaying settings, results and status
 A keyboard for navigating on the screen, changing settings and controlling the
measurement
 A light ring to indicate which colour-coded to reflect the status of the
instrument.
2.2 Switch sound level meter On/Off
Switch on the sound level meter by pressing the Power/Menu/Select button for
a few seconds. The instrument will start in the last used measurement display.
Pressing and holding down the button for at least 4 s will switch off the sound level
meter.
2.3 Setting up the sound level meter
Note: Not all settings might be available on your sound level meter – only settings
being part of the licensed features are available.
Press the Power/Menu/Select button to enter the menus.
The menus are hierarchically ordered, you
navigate in them using up/down buttons and
between them using the left/right arrow
buttons.