Instruction Manual

Sound Level Meter Types 2245 – Instruction Manual Page 68 of 110
Humidity
IEC 60068–2–78: Damp Heat: 93% RH (non-condensing at +40 °C (104 °F)). Recovery
time 2 ??4 hours
Mechanical
Non-operating:
IEC 60068–2–6: Vibration: 0.3 mm, 20 m/s2, 10 – 500 Hz
IEC 60068–2–27: Bump: 1000 bumps at 400 m/s2
IEC 60068–2–27: Shock: 1000 m/s2, 6 directions
Enclosure
IEC 60529 (1989): Protection provided by enclosures: IP44*
* With preamplifier, extension cable or protection plug connected to the top socket
and the hinged cover protecting the bottom connectors
Chapter 5
Regulatory
5.1 Regulatory ID’s summary
Model
US/FCC
Canada/IC
-2245---
2ASFB-2245-1
24805-2245-1
5.2 Certified Antennas – do we need this?
Model
Type
Connector
Peak gain
(2.4-2.5 GHZ)
Laird/NanoBlade-??
??
??
2dBi
5.3 FCC and IC/ISED Regulatory
5.3.1 FCC (Federal Communication Commission Interference Statement)
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference