User's Manual
Bluetooth Test Setup
SaBLE-x-R2 Module
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/wireless
338-0016-R1.0
5
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
2 SOFTWARE TEST SETUP
2.1. Dev Board Setup with PC
▪ Apply external power via J6 on the PCBA (#1)
▪ Make sure all switches on S5 and S6 are set OFF on the PCBA (#5)
▪ Set switch 5 and 6 ON on S7 (#2)
▪ Set Switch to EXT (#4)
Figure 2: COM Identifier
▪ Run Bluetooth RF Eval Tool Version 8.7.0.0 (Provided by LSR)