User's Manual

Sterling-LWB5 Module

APPLICATION GUIDE

The information in this document is subject to change without notice.

4 Reference Designs

In order to use the modular certification for your design, it is critical that the reference design is

correctly followed. This section describes the details of using a PCB that is a 4-layer stack up.

The full 4-layer Chip Antenna PCB reference design is shown in Figure 1 and Bill of Materials in

Table 2. The full 4-layer U.FL (external antenna) PCB reference design is shown in Figure 2 and

Bill of Materials in Table 3.

It is not required to replicate the entire design, but what is required are the circuitry and layout

as it pertains to the antenna configuration being used in your design as shown in

Visit the LSR web site http://www.lsr.com for the current PCB and Schematic CAD files.