Installation Instructions

Aversan Inc.
Rev. 1.0 Page 9 of 9
• 2x ARINC 717 receivers
• 8x ARINC 720 gnd/open discretes
o 4x Discrete inputs
o 4x Discrete outputs
ASCB Module
The ASCB Module provides the following interfaces:
• 2x ASCB receivers
• 1x RS-232 interface (TX and RX)
RS Module
The RS Module provides the following interfaces:
• 2x RS-232 interfaces (TX and RX)
• 3x RS-422/485 interfaces (TX and RX)
• 1x RS-422/485 synchronous / asynchronous interface with clock input (TX, RX, and RX clock)
Configurations
The following configurations are supported:
Configuration 0: ADG-400 Core Unit
Configuration 1: ADG-400 Core Unit + RS RMI + ASCB RMI
Configuration 2: ADG-400 Core Unit + Ethernet RMI + ASCB RMI
Configuration 3: ADG-400 Core Unit + ARINC RMI + ARINC RMI
Important information:
1. Do not insert conductive object into the equipment through the ventilation holes
2. The equipment shall be operated by instructed or skilled person only
3. Installation shall ensure at least 27 cm separation distance between the rear antennas and the
user’s body.
4. Installation shall ensure at least 24 cm separation distance between the front panel (internal)
antennas and the user’s body.