User's Manual

L
WIRELESS PHONE CHARGER
The wireless phone charger is located in the middle console. The charger is only compatible with
Qi enabled devices, with a maximum width of 2.8 in (71 mm).
Note: iPhones require a Qi enabling phone cover for wireless charging.
Make sure the phone screen is facing the driver's seat. Press the base of the phone onto the
wireless phone charger lid, and then fully insert the phone, as illustrated. The wireless phone
charger lid rotates to allow access and to secure the phone into position.
Lightly pull up the phone to remove. The wireless phone charger lid rotates back to the closed
position, preventing foreign objects entering the charger.
Note: Some phone covers may require removal if the phone installation or charging is impaired.
The current charging status is indicated by an LED indicator lamp on each side of the wireless
phone charger.
Amber illumination indicates the phone is charging.
No illumination indicates the phone is fully charged, or not charging.
Red illumination indicates a system fault. For example, the current temperature is excessively hot
or cold, foreign object detection, and radio frequency interference.
Do not place a smart key or key fob in close proximity to the charger.
Do not store items in the charger.
No maintenance is required.Do not use aerosols, sprays, liquids, solvents, or abrasives.