User Manual

-20-
Audio 2010
Connection to the vehicle electronics
Checking the mute inputs
The mute inputs 1-3 can be seen in the
illustration. The yellow mute cable of
the Audio 2010 is connected to one of
these inputs. Please refer to the table
for which mute input is to be used.
The matching mute connection is
separated and connected with the yel-
low cable.
7. 2. Checking the installation
If the ISO connection cable has been connected correctly, the message
www.fwd-online.de is represented on the display with ignition switch-off. If this
message does not appear, then the ignition cable (blue) must be interchanged
with the voltage supply cable (red) (see Fig.).
red
blue
red
blue
red
blue
blue
blue
red
red
blue
red