EXTRACT FROM ACCUSPEED™ OPERATING INSTRUCTIONS FOR R3HNX 450 MHz UHF TRANSCEIVER & RF AMPLIFIER BOARD 09/2003, CATTRON-THEIMEG™ Page 1 of 4
Radio Frequency (RF) Transceiver. The RCR 'Gold Box' incorporates the R3HNX Transceiver Board, together with its ‘companion’ RF Power Amplifier Board. The R3HNX Transceiver Board is a multi channel, UHF-synthesized RF receiver with a Liquid Crystal Display (LCD). Additionally, it has a built in RF transmitter for ‘POLLING™ ’ data transmission.
Radio Frequency (RF) Transceiver, continued. Figure 1-7. R3HNX Transceiver & RF Amplifier Board LED Indicators TO ANT TX Q-SYNC LED RF POWER LED DATA LED CARRIER DETECT LED TO RX VCO LOCK LED TO TX RF AMPLIFIER BOARD RX RECEIVER POWER LED TRANSCEIVER BOARD Table 1-2. R3HNX Transceiver & RF Amplifier Board LED Indicators LED Transceiver Power Description This red LED indicates the presence of DC power on the transceiver circuit board.
SYSTEM SUMMARY – Technical Specifications LCU [RCR] Enclosure: Weight: Environment: 20"L x 20"H x 8"W (50.80cm x 50.80cm x 20.32cm), NEMA 4 (IP66) Steel. Approximately 70 lbs (31.
