Data Sheet

LC840PA
Datasheet
https://www.lairdconnect.com
51
© Copyright 2021 Laird Connectivity
All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]
10 ORDERING INFORMATION
Part Number
Product Description
453-00087
LC840PA ProFLEX compatible PA module – Integrated antenna
453-00088
LC840PA ProFLEX compatible PA module – External antenna
455-00022
Development Kit for 453-00087 module – Integrated antenna
455-00023
Development Kit for the 453-00088 module – External antenna
453-00087R
LC840PA ProFLEX compatible PA module – Integrated antenna T/R
453-00088R
LC840PA ProFLEX compatible PA module – External antenna T/R
11 BLUETOOTH SIG QUALIFICATION
Bluetooth SIG qualification is available for the BL654PA only, not the LC840PA.
11.1 Overview
The BL654PA module is listed on the Bluetooth SIG website as a qualified End Product.
Note: The LC840PA is included under the BL654 listing.
Design
Name
Owner
Declaration ID
QD ID
Link to listing on the SIG website
BL654PA
Laird
D040166
114304
https://launchstudio.bluetooth.com/ListingDetails/63185
BL654PA
Laird
D041400
117615
https://launchstudio.bluetooth.com/ListingDetails/67595
BL654PA
Laird
D049255
145177
https://launchstudio.bluetooth.com/ListingDetails/102275
It is a mandatory requirement of the Bluetooth Special Interest Group (SIG) that every product implementing Bluetooth
technology has a Declaration ID. Every Bluetooth design is required to go through the qualification process, even when
referencing a Bluetooth Design that already has its own Declaration ID. The Qualification Process requires each company to
registered as a member of the Bluetooth SIG – www.bluetooth.org
The following link provides a link to the Bluetooth Registration page: https://www.bluetooth.org/login/register/
For each Bluetooth Design, it is necessary to purchase a Declaration ID. This can be done before starting the new qualification,
either through invoicing or credit card payment. The fees for the Declaration ID will depend on your membership status, please
refer to the following webpage:
https://www.bluetooth.org/en-us/test-qualification/qualification-overview/fees
For a detailed procedure of how to obtain a new Declaration ID for your design, please refer to the following SIG document:
https://www.bluetooth.org/DocMan/handlers/DownloadDoc.ashx?doc_id=283698&vId=317486
11.2 Qualification Steps When Referencing a Laird End Product Design
To start a listing, go to: https://www.bluetooth.org/tpg/QLI_SDoc.cfm
In step 1, select the option, Reference a Qualified Design and enter D040166, D041400, or D049255 in the End Product table
entry. You can then select your pre-paid Declaration ID from the drop-down menu or go to the Purchase Declaration ID page,
(please note that unless the Declaration ID is pre-paid or purchased with a credit card, it will not be possible to proceed until the
SIG invoice is paid.