Application Guide

Sterling-LWB Module

APPLICATION GUIDE

The information in this document is subject to change without notice.

5.1 Sterling-LWB SIP Module with Chip Antenna Reference Design #1

When integrating the Sterling-LWB SIP module (LSR Part Number 450-0159) into a host PCB that

uses the certified Chip Antenna, the PCB layout shown in Figure 1 should be followed. It is

acceptable to either populate or remove the U.FL circuitry J1 on any of the designs. Visit

http://www.lsr.com for current PCB and Schematic CAD files.

Keep in mind that when specifying parts for the design, the RF components that cannot be

substituted are shown in Table 4.

Figure 1 SIP Module with Chip Antenna Reference Design