User Manual

welcome
TheTalkyOne
getting started
how to ...
signals
care
support
safety & disposal
certification &
safety approvals
glossary
back
multipoint
With multipoint (multiple connections), you can connect
TheTalkyOne with two mobile devices at the same time.
With the primary device, you can access all advanced
functions, and with the secondary device you can access
the basic call functions.
• To assign the primary status to a specific device,
connect this device to your speakerphone first. The next
device will automatically be assigned secondary status.
• During an active call, only one phone can be
connected to TheTalkyOne. When an active call is
connected to your speakerphone, and the second
connected phone receives a call, your current call will
not be interrupted. After you have ended your call,
TheTalkyOne will reconnect to the second phone so
that they both are reachable again.
• If you make an outgoing call from the secondary
device, it will become the primary device for the
duration of the call.
•  To change the priority of the primary and secondary
device, you must reset the pairing list. To do so, press
and hold (4 sec) the multi-function button and volume
up(••)atthesametime.Thenre-connectthedevices
to your speakerphone, starting with the one you want
as your primary device.
pairing
_read more
support
_read more
make advanced calls
_read more