User's Manual

Operating manual
PREMIUM mobile telephone provision 28
Functional description
 First read and observe the safety warnings on page 14 and the information on page 27.
Together with a compatible mobile telephone, the PREMIUM mobile telephone provision forms a fully-
fledged GSM car telephone system. The mobile telephone must support the Bluetooth Remote SIM
Access Profile (RSAP). The PREMIUM mobile telephone provision does not use a SIM card of its own,
but “borrows” the SIM data of the mobile telephone via a Bluetooth connection. The mobile telephone
logs itself out of the GSM network and the PREMIUM mobile telephone provision logs itself in using the
data from the “borrowed” SIM card. The telephone is then controlled exclusively via the controls in the
vehicle. The mobile telephone switches into pause mode.
Pairing process and user profile
Before the PREMIUM mobile telephone provision can be used, a one-time pairing process with the
mobile telephone must be carried out to “connect” the units to each other. A user profile is created in the
PREMIUM mobile telephone provision which is uniquely linked to the mobile telephone and the SIM
card.
Once the pairing process has been carried out, the PREMIUM mobile telephone provision will connect
automatically with the “known” device via the Bluetooth connection when the ignition is switched on.
Pairing a mobile telephone before using for the
first time
 First read and observe the safety warnings on page 14 and the information on page 27.
Each mobile telephone must be paired with the PREMIUM mobile telephone provision via Bluetooth.
The pairing process takes a few minutes. Pairing can only be carried out when the ignition is switched on
and the vehicle is stationary.
For pairing, you do not need to place the mobile telephone in the charging base (telephone holder).
Read the operating manual for the mobile telephone and prepare the mobile telephone for pairing
 page 23.
Keep the mobile telephone close to hand as you will need to operate it during the first pairing procedure
between the PREMIUM mobile telephone provision and the mobile telephone.
Step 1: Making the Bluetooth connection visible
 Activate the Bluetooth function on the mobile telephone and, if necessary, activate the external SIM
mode, which allows the mobile telephone provision to access the mobile telephone's SIM card informa-
tion via Bluetooth.
 Switch the mobile telephone to “Device visible for all”. The mobile telephone will then be visible for
a number of minutes (depending on the telephone). Repeat steps 1 and 2 as required if the time allowed
expires without successful pairing.
Step 2: Bluetooth device search
 Switch on the ignition.
 Open the telephone menu on the combi-instrument display.
 Select the Device search menu item to search for compatible Bluetooth mobile telephones in the
vehicle. A list of the Bluetooth names of the devices found will be shown after the search has been com-
pleted.
ENTWURF