MSDS

Page 3 of 5
eye protection
9
form
color
odor
pH
melting point/melting point range
boiling point/boiling point range
evaporation rate:
vapor density:
Specific gravity:
Solubility in/Miscibility with water:
Density at 20°C:
VOC:
10
Conditions to be avoided:
Chemical stability:
Materials to be avoided:
Hazardous polymerization:
11
n/a
12
Exposure of eyes to product mix may cause chemical burns and blindness.
Exposure to airborne dust can cause immediate or delayed irritation or
inflammation.
Toxicological information
Ecological information
Additional toxicological information:
None known
Exposure of skin to product mix may cause chemical burns. Symptoms of
exposure may take several hours to manifest.
on the skin
on the eye
Primary irritant effect:
Will not spontaneously occur. By fire - low molecular weight hydrocarbons, carbon dioxide and monoxide
Heavier than air.
Will not occur
Acute toxicity:
190-212
o
F
Slower than ether.
Mild ammonia.
milky white
Prevent prolonged or repeated contact by using rubber gloves and appropriate
protective clothing.
skin protection
Wear safety glasses to reduce the potential for eye contact.
If personal exposure cannot be controlled below applicable limits by ventilation,
wear a properly fitted organic vapor/particulate respirator approved by NIOSH
for protection against materials described above.
General information:
n/a
through ingestion May be harmful if ingested.
through inhalation
Dust generated during handling this product concentrate may cause irritation to
the respiratory tract.
respiratory protection
Physical and chemical properties
1910.94, 1910.107, and 1910.108.
1
pH: 8.0-10.0
Dangerous decomposition products:
Stable
None known
0 g/l(0.0 lb/gl)
Change in condition:
Stability and reactivity
Fluid
32
o
F
8.34 lb/gl
dispersible