Installation Guide

Adacryl Admix & Bonder

Admix and Bonding Agent

DESCRIPTION:

n 100% Acrylic emulsion additive for

portland cement based products

n Admixture in portland cement based

mixes

n High-performance acrylic polymer

bonding agent

USES:

As an admix for stucco base coats:

n Improves workability and handling

of stucco bases

n Promotes better hydration and

curing of stucco bases

n Improves bond between stucco

bases and strong, dense masonry

surfaces

As an admix for stucco cement finishes:

n Increases strength of stucco finishes

n Improves bond between stucco

finish and base coat surface

As a bonding agent:

n Increases shear bond adhesion

n Portland cement–based products

may be applied while Parex USA

Adacryl Admix & Bonder Admix and

Bonding Agent is tacky within 3

days of drying.

n Suitable for application with a

brush, roller, or sprayer

COMPOSITION:

n Single component liquid

n Viscosity: Low

n Color: Milky white liquid

n Water-based VOC compliant

PAGE 1
Adacryl Admix & Bonder Admix and Bonding Agent DESCRIPTION: n 100% Acrylic emulsion additive for portland cement based products n Admixture in portland cement based mixes n High-performance acrylic polymer bonding agent USES: As an admix for stucco base coats: n Improves workability and handling of stucco bases n Promotes better hydration and curing of stucco bases n Improves bond between stucco bases and strong, dense masonry surfaces As an admix for stucco cement finishes: n Increases strength of
PAGE 2
COVERAGE: As an acrylic bonding agent: Approximately 200-300 sq. ft. (19-28 sq. m) per gallon depending on the method of application and the surface to which it is applied. CONTAINER: 1 quart (1.0 L), 1 gal. (3.8 L) jug and 5 gal. (19 L) pail n Storage: Protect from direct sunlight and freezing at all times n Do not stack more than 3 pails high n Shelf Life: One year if properly stored in original unopened container. Drying Time: As an admix, provide adequate air circulation for drying.