INSTRUCTION MANUAL Laguna 37“ X 71” Rectangular Dining Table SKU:OP8006 V 1.
NOTICE Do not overtighten screws. (Insert all screws before tighten screws.) • Please do not exceed the weight limitations of this item. • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws and nuts before use. • Reconfirm that all bolts, screws, and nuts are secure every 90 days. • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. • Be aware that some parts are heavy and have sharp edges.
PARTS D E SIDE RAIL UMBRELLA HOLE COVER 4 PCS 1 PC PRODUCT ASSEMBLY-OVERALL VIEW 1 Look at following overall view of this table and exact position of each parts to be assembled .
PRODUCT ASSEMBLY 1 Attach part B Table Bottom Feet to part C Table Leg with 16 pcs of Hardware 1 Bolt 1 C C C C C 2 B C C C 1 B B B 2 1 1 Attach part D Side Rail between 2 pcs of part C Table Leg with 16pcs of Hardware 3 Bolt.
PRODUCT ASSEMBLY 3 Attach part C Table Leg to part A Table Top with 16 pcs of Hardware 2 Bolt. 4 Nut and 5 Wahser. C 4 5 C 2 2 A C C C 4 5 4 C C 2 2 C 5 4 5 A 4 Check and tighten all the bolts and screws again and finish the assembly.
