Product Manual

20 | Page
• When trying to reestablish your station’s Wi-Fi connection, be sure your mobile device is on
the same 2.4GHz network you want your station to use.
• Check your network connection.
• Hold the + and - buttons together for 3 seconds to search for Wi-Fi.
• Go into the La Crosse View™ app, select your station, and then choose “Connect Wi-Fi” from
the app menu. Reenter your Wi-Fi network’s login information.
“SEE APP TO CONNECT”
– Your station has lost connection with your app.
• The Wi-Fi router connection is working.
• Check your connection to the La Crosse View™ app. Select your station, and then choose
“Connect Wi-Fi” from the app menu. Reenter your Wi-Fi network’s login information.
• Is there an update to install?
“NO NWS”
- This indicates and error on the NWS server. There is nothing you can do for this.
• NWS Expanded Forecast, will not update or show.
• The NWS will resolve this.
• Very rare to have this error.
Note:
When you first connect to the La Crosse View™ app, “NO NWS” may alternate with “ALL
OK” for a few seconds until the station establishes contact with the NWS server.
CAN I MOVE MY STATION TO A NEW HOUSE?
• Yes, it is very easy to move your station to a new location. You will simply need to connect to
the new Wi-Fi.
• If you change your Wi-Fi network, simply go into the La Crosse View™ app, select your
station, and then choose “Connect Wi-Fi” from the app menu. Here, you will just need to
enter your new Wi-Fi network’s login information.
Note:
If switching to a new Wi-Fi network, your station may take up to 3 minutes to reacquire all
sensor information.
ADD SENSORS: HOW CAN I ADD SENSORS TO MY LA CROSSE VIEW™ APP?
Check for compatible sensors to purchase at www.lacrossetechnology.com/V21-WTH
Note:
The number of sensors you can add will be limited by the memory of your mobile device
and the speed of your Wi-Fi network connection.
Open your La Crosse View™ app to add sensors.
1. From Main Menu - select “Devices” under “Add/Edit”
2. On Edit Devices page - select “ADD DEVICE”
3. Scan Device ID - Scan the Bar Code on your sensor or choose “ADD MANUALLY” to type in
the number on the bar code. Select “CONTINUE”.
4. On Confirm Device page - Confirm the sensor image and select “YES”