Product Manual
Page | 4Wi-Fi Wind & Weather Station
THERMO-HYGRO
Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting it on a north-facing wall under an eave or deck for best results.
WIND SPEED
Ensure the sensor is mounted vertically an unobstructed rooftop is ideal.
• Your wind sensor should be the tallest object in the area to avoid educed wind speed values.
WATER LEAK
Works best placed flat on the floor. The water sensor contacts should not be touching other metal.
It will detect water at 0.031inches (0.787 mm). When placed vertically the water needs to be at least 0.25
inches (6.35 mm) to trigger the alert.
For detailed sensor setup and mounting instructions, see page 26.
Buttons located on top of Profesional Weather Station
Buttons located on the right side of Professional Weather Station
QUICK MOUNTING TIPS
BUTTON FUNCTIONS
EXTRA
SENSOR
SETTEMPWINDALERTS SENSOR LIGHT
ALERTS Hold to enter Alert Set Mode.
WIND, TEMP Press to view history.
+ or Use + or – to adjust values in settings.
+ & Hold both buttons to search for Wi-Fi.
SET Hold for basic settings. Press to view Wi-Fi status.
EXTRA SENSOR
Press to toggle through Extra Sensors & Barometric Pressure.
Hold to add Sensors.
SENSOR
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold
MINUS (–) to remove.
LIGHT Press to adjust brightness. Hold to set Auto Dim.
ALERTS & LIGHT Hold both buttons to reset all sensor ID’s and Wi-Fi settings.
DAILY, HOURLY Press to see forecast. Must be connected to Wi-Fi.