Product Manual

Page | 23Wi-Fi Wind & Weather Station
• Your station itself has a Pressure Sensor inside to provide accurate Relative Pressure readings.
• The station will default to a Relative Pressure of 29.92 Inches of Mercury.
• Give it up to 3 days to automatically adjust to your environment.
• The Relative Pressure number is programmable in the Settings Menu.
• You can select INHG (Inches or Mercury) or HPA (Hecto Pascal) for Pressure units in the Settings Menu.
• The UP and DOWN Arrows indicate the Pressure Tendency (rising or falling). This is calculated when the
average value of the current hour’s barometric pressure is compared to the average of the past 3 hours. If
the dierence is greater than +1hpa, the air pressure trend will increase; if the dierence is less than -1hpa,
the air pressure trend will decrease; if it is between +1 and -1hpa, it will be flat.
Pressthe EXTRA SENSOR button to switch between your Water Leak sensor reading and Relative
Pressure reading.
RELATIVE PRESSURE READING
PRESSURE
INHG
EXTRA SENSOR
PRESSURE
INHG
SENSOR RECEPTION INDICATORS
There are Sensor Reception Indicators for your Temperature/Humidity Sensor, Wind Sensor and Water
Leak Sensor. If you add Extra Sensors, there will be a Sensor Reception Indicator for them as well.
• When indicator is solid, sensor is connected.
• When indicator is flashing, it is searching for the individual sensor.
• If there is no indicator, the sensor is not connected.