Product Manual

WIRELESS TEMPERATURE & HUMIDITY STATION COMBO PACK
8 | PAGE
Station:
1. When Battery Indicator shows next to the Indoor Humidity, change batteries in the station.
2. When changing the batteries in the station, continue using the power cord. After replacing the batteries,
no other action is needed. The batteries in the station only maintain time/date in the event of a power
outage.
SENSOR SEARCH
• If you are seeing dashes in place of outdoor temperature, first check your sensor batteries.
• Hold the PLUS (+) button for 3 seconds to search for the sensor. Sensor Reception icon will flash while
searching and be solid when sensor signal is received.
• If you regain connection while the sensor is mounted, great. If you do not regain connection, bring the
sensor within 10 feet of the station and search again.
Note:
• If the signal is lost, the RX will display the ast data recorded from sensor for 10 minutes.
• After that 10 minutes if the signal does not come back then you will see dashes “--”.
• After 30 minutes, start looking for the sensor signal automatically.
MINI DISPLAY: LCD FEATURES
OUTDOOR
LO
Sensor Reception
Indicator
Sensor Low
Battery Indicator
Outdoor
Temperature
Percent Relative
Humidity (RH)
Indicator
Trend Indicator
Time
AM/PM
Indicator
INDOOR
Station Low
Battery Indicator
Percent Relative
Humidity (RH)
Indicator
Indoor
Temperature
Trend Indicator
Time
AM/PM
Indicator
Press and release the SET/IN-OUT
button to view Indoor Temp/Humidity or
Outdoor Temp/Humidity.