Color Wind Speed Weather Station For online video support: http://bit.
Contents Setup Preparation Quick Setup .......................... 3 Weather Forecast Icons ................... 11 .................................. 3 Forecast Trend Arrows ................... 11 4 Backlight Adjustments .................. 11 Buttons ....................................... Settings ....................................... 4 ................................. 5 Atomic Time Change Batteries Sensor Search ......................... 12 .............................
Setup Preparation Items you will need to setup your station (not included): 1. Phillips head screwdriver for assembly. 2. Fresh Batteries: 3 (three) AA alkaline batteries for the station (optional) 2 (two) AA alkaline or lithium batteries for the TH sensor. 2 (two) C alkaline or lithium batteries for the Wind sensor. For best results: • Remove weather station and sensors from the package and place together on a table or bench, within easy reach.
Buttons • Buttons are located on the top of the weather station. • When entering a settings mode, hold the correct button (SET, ALERTS). • And press and release the correct SET or ALERT button again to move to the next item in that setting mode. • Press and release the +/- buttons to change a setting. • Press and release the correct button to view readings (Wind, or Temp/Humidity). Settings 1. Hold the SET button for 3 seconds to enter time set mode. 2.
To begin: Hold the SET button 3 seconds, then release: 1. BEEP ON | OFF 2. ATOMIC ON | OFF 3. Time Zone 4. DST ON | OFF 5. 12 | 24 Format 6. Hour 7. Minutes 8. Year 9. Month 10. Date 11. Fahrenheit | Celsius 12. MPH | KMH Note: The day of the week is set automatically, after Year, Month, and date are specified • Press the LIGHT button at any time to exit. • After 20 seconds with no button press, the station will default back to normal time display.
Display Icons CH 1 AM | PM Forecast Icon Atomic Time Percent Humidity Daylight Saving Time HI | LO Alert Sensor Strength Kilometers | Miles per hour Fahrenheit | Celsius CH 1 Channel Indicator Trend Arrows Wind Speed Graph • Wind speed chart will fill to current speed. Current speed will blink. Example: 16 mph wind will show filled sections to 10 mph, and 15 mph color segment will flash. • The units (MPH/KMH) are setup in the settings menu.
Wind Readings Wind Speed: Highest speed in past 30 seconds Top Wind Speed: Highest recorded wind speed in time interval. Default is 1 hour, controlled by the Wind History feature, details below. Feels Like Temperature: Wind Speed | Temperature | Humidity combined • When outdoor temp is higher than 80˚F, displays heat index • When outdoor temp is lower than 50˚F, displays wind chill • When outside of the above ranges will display current outdoor temperature.
Reset Wind Speed History • Press the WIND button to view individual wind speed readings. • Hold the MINUS button for five seconds to reset each individual value. • Wind speed reading will reset to current wind speed. Temperature/Humidity HI | LO Readings Press and release the TEMP button to view HI/LO temperature and humidity readings with time/date stamp. Press and release TEMP again to view the next value.
Reset Temperature/Humidity Readings: • Press the TEMP button to view individual HI | LO readings. • Hold the MINUS button for five seconds to reset each individual value. • Individual readings will reset to current temperature, humidity, etc. Set Weather Alerts • Hold the ALERTS button for 3 seconds to enter alert set mode. • High Wind Speed ON | OFF will flash. Alert ON: 1. Press the +/- buttons to arm the alert. 2. Press the ALERTS button and the alert value will flash 3.
• • • • Outdoor Outdoor Outdoor Outdoor LOW Humidity ON/OFF LOW Humidity Value 10%RH to 99%RH HIGH Humidity ON/OFF HIGH Humidity Value 10%RH to 99%RH • • • • Indoor Indoor Indoor Indoor LOW Temperature ON/OFF LOW Temperature Value 32°F to 99°F (0°C to 37°C) HIGH Temperature ON/OFF HIGH Temperature Value 32°F-99°F (0°C to 37°C) • • • • Indoor Indoor Indoor Indoor LOW Humidity ON/OFF LOW Humidity Value 10%RH to 99%RH HIGH Humidity ON/OFF HIGH Humidity Value 10%RH to 99%RH Active Alert • When armed al
Weather Forecast Icons • The forecast icons are determined by the station's barometric pressure reading. • When Outdoor temperature is below 32˚F and the forecast is RAIN or T-STORM, the station will display SNOW. SUNNY PARTLY CLOUDY RAIN T-STORM CLOUDY SNOW Forecast Trend Arrows Forecast trend arrows indicate the rise and fall of barometric pressure.
Change Batteries TX144W Sensor: 1. Grab the vented portion of the sensor and turn counter clockwise. 2. Remove old batteries and install fresh “C” batteries. 3. Carefully align and turn vented portion clockwise to tighten. 4. Hold the WIND button on the weather station for 3 seconds to search for the sensor.
Connect Add-on Sensors to Station • The wind station will accommodate up to two additional (TX141TH-BCH)* Thermo-Hygro sensors on channels 2 & 3. *Additional sensors sold separately & can be purchased here: www.lacrossetechnology.com/tx141th-bch-temperature-humidity-sensor Note: No additional TX144W wind speed sensors may be added. Connect add-on sensor(s) to the wind station: 1. Remove the battery cover from all add-on sensors (leave off ). 2.
Mounting TX141TH-BCH Sensor AA AA Mounting Hole • To mount the sensor, use the hole at the top to either hang it from the back using a nail, or inserts one mounting screw through the front • Mount the TX141TH-BCH sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is preferred. • The maximum wireless transmission range to the weather station is over 330 feet (100 meters) in open air, not including walls or floors.
Position Weather Station • Pull out the stand and place on a flat surface. • Or use the two hanging holes on the back to mount on the wall, near an outlet for constant backlight. 1. Choose a location 6 feet or more away from electronics such as cordless phones, gaming systems, televisions, microwaves, routers, etc. 2. Place within range of the outdoor sensors (330 ft, 100m open air). 3. Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the range. 4.
Visit Us on Social Media Latest video content http://bit.ly/LaxTech_YouTube For personalized interaction http://bit.ly/LaxTech_Facebook Join the conversation http://bit.ly/LaxTech__Twitter Pin and share http://bit.ly/LaxTech_Pinterest Care and Maintenance • • • • • Do not mix old and new batteries Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries Always purchase the correct size and grade of battery most suitable for intended use.
Specifications Indoor Temperature Range Humidity Range Update Interval 32°F to 122°F (0°C to 50°C) 10% to 99% RH About every 60 seconds Thermo-hygro Sensor Temperature Range Humidity Range Update Interval -40°F to 140°F (-40°C to 60°C) 10% to 99% RH About every 58 seconds Transmission Range 330 feet (100 meters) RF 433MHz Wind Speed Sensor Wind Speed Range Update Interval Transmission Range 0-111.
Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support or visit our online help: Phone: 1-608-782-1610 Online: www.lacrossetechnology.com/support/ View full warranty details online at: www.lacrossetechnology.com/warranty_info.
