Owner Manual

LACAVA 4
Installation Instructions for Undermount Sinks
1. Prepare the countertop cutout according to the sink’s size.
IMPORTANT!
The cutout size should be at least 1/4” smaller on all sides
than the inside dimensions of the sink.
2. Apply a small bead of silicone around the top edge of the
washbasin, making sure to follow the directions on the label.
3. Place the countertop upside down and then position the
washbasin over the cutout in the top.
4. If mounting clips or brackets provided, place each of the
mounting clips around the edge of the sink. Then tighten
each clip into place using the provided screws and
wipe up any excess sealant.
IMPORTANT!
If no brackets or clips provided, use sealant proper for the
countertop material and let the sealant set completely
for proper bonding, following the instructions on the bottle.
5. Turn the countertop right side up, attach to the vanity,
and then hook up the faucet, drain and supply lines.