User's Manual

W9922PF PC DVD Playback Card
Page - 8
B ) Composite VIDEO Output Connector J1
If your television set does not support an S-Video input port, you may connect it to the
PC DVD Playback Card by using a Composite Video cable.
Composite Video is more common and works with most televisions.
Figure - 4
Installation:
Step 1. Plug the COMPOSITE VIDEO Cable into the RCA Jack J1 on the PC DVD
Playback Card and the other side into the Composite VIDEO Input port of your
TV set.
Please refer to Figure 4 for the location of this external connector.
NOTE: Due to the copyright protection circuit in use by this product, please do not
connect any recording device, such as a VCR, to the Composite Video Out
connectorJ1 of the PC DVD Playback Card. For best playback, make sure
the DVD title is played directly from the PC DVD Playback Card onto a
TV, not through a VCR.