User's Manual

W9922PF PC DVD Playback Card
Page - 6
7.) Insert the card into the PCI/AGP expansion slot. Press down gently on the top
edges of the board to ensure that all connecting points are seated securely.
Anchor the board’s mounting bracket using the screw removed earlier.
8.) Replace the cover of your PC and reconnect the power cord.
NOTE: If you install a DVD-ROM drive at the same time as the PC DVD
Playback Card, remember to attach the CD-Audio cable from the DVD-ROM
drive to your sound card. Otherwise, you will not be able to play CD-Audio
titles with the DVD-ROM drive. This will not affect the audio of DVD-Video
or DVD-ROM titles.
2.3.1. Video Connections
VGA MONITOR Connector P1
VGA LOOP BACK Connector P2
Figure - 2
Installation:
Step 1. Plug the VGA LOOP BACK Cable into the 9-pin female MINI-DIN
connector P2 on the PC DVD Playback Card and the other side into the 15-pin
D-shape female VGA Output connector of your VGA Card.
Step 2. Plug the VGA Monitor Cable into the 15-pin D-shape female VGA Output
connector P1 on the PC DVD Playback Card.