LAB-DVD DECODER BOARD The information in this document is subject 10 change without notice Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
LAB-DVD DECODER BOARD TABLE OF CONTENTS 1. DESCRIPTION 1.1. FEATURES 1.2. SYSTEM REQUIREMENTS. 1.3. CARD FIGURE .. 1.4, CONNECTORS... 1.4.1. External Conn internal Connectors 1.5. PC-DVD FUNCTION. 2. HARDWARE INSTALLATION recentness 0 2.1. HANDLING THE DVD DECODER BOARD. 2.2, INSTALLING THE DVD) DECODER BOARD 3. SOFTWARE INSTALLATION 3.1. SOFTWARE CONTENTS Loovirieeiiie Renee 3.2. DEVICE DRIVER AND APPLICATION INSTALLATION NUDE 3.2.1. General Advice on how vo install the Application Software 3.2.2.
LAB-DVD DECODER BOARD 1. DESCRIPTION This is a new LAB AC-3 DECODER BOARD that provides at low cost, high integration system for playback of MPEG-2, Dolby audio and video bit streams in Windows-based personal computers. Our LAB-DVD Board not only meets the new demands of advanced PC audio and video applications but also enables the integration of a complete multimedia subsystem, It has software support for games, DVD and Video-CD movies in Windows. 1.1.
LAB-DVD DECODER BOARD DVD LICENSE = CSS Copy Protection agreement license. = Macro vision 7.01 agreement license. = Dolby AC3 agreement license. 1.2. System Requirements « PC system with Pentium CPU, at least 133 MHz or compatible is recommended in order to use the Soft AC/3 function in high quality mode. + Compatible Sound Blaster sound card. 1.3. Card Figure oases rems output APIOOUTRLT nt Feature Connector for 5 forms to.
LAB-DVD DECODER BOARD 9-pin female MINI-DIN Connector for VGA LOOP BACK. 15-pin Connector for VGA MONITOR. 1.4.2. Internal Connectors: CNI: Internal Feature Connector for VIDEO OVERLAP. J2: fraternal Connector for STEREO AUDIO OUTPUT. Internal Connector for I'S FORMAT for DIGITAL AUDIO OUTPUT. ...Internal Connector for SPIFF OUTPUT. Js. 1.5. PC-DVD Function In order to use the SPIFF output to Dolby Pro Logic Surround Sound amplifier and speakers, please run the PCDVDCFG.EXE file.
2. LAB-DVD DECODER BOARD HARDWARE INSTALLATION 2.1. Handling the DVD Decoder Board WARNING: Static electricity can damage your equipment. Do not take the card out of its static protective bag until you are ready to work with it, Follow these precautions when handling the board Before you open the static protective bag, touch it to a metal expansion slot cover on the back of your computer, This drains static electricity from the package and from your body.
LAB-DVD DECODER BOARD Plug the LOOP BACK cable into the 9-pin female MINI-DIN connector J6 on the DVD Decoder Board and the other side to your VGA Card. The VGA Monitor cable connect to 17 Step 6. Plug the RCA cable into the RCA Jack J3 (Composite Video) on the DVD) Decoder Board and connect it with your TV set. If your TV set supports §-Video input, you can connect an S-VIDEO cable to J4, in order to get a better video quality Step 7.
LAB-DVD DECODER BOARD If you have not already done so, please consult the document entitled “readmitted” before you proceed with the VPM installation. Please follow the step-by-step instructions using the section that describes your graphics card. 3.2.1.
L LAB-DVD DECODER BOARD Step 2. Upon shutdown, install PC1 DVD board. Connect feature connector ribbon cable between the PCI DVD board and display adapter verify that Pin 1 of display adapter feature connector corresponds to Pin 1 of PCI DVD board YM! PORT connector, Step 3. Once Windows has started, install the PCI DVD Player device driver. Install the driver from the installation diskette, labeled “PCE DVD Decoder DRIVER/APPLICATION 1”. Step 4.
LAB-DVD DECODER BOARD Step 3. Once Windows has started, install the PCL DVD Player device driver. Install the driver from the installation diskette, labeled “PCI DVD Decoder DRIVER/APPLICATION 17. Step 4. After you have finished the installation of the device driver, use the RUN command from the START menu to install the Application Software. Use the command “SEXTUPLET" and click OK. Follow the on-screen instructions of the SETUP program to complete the installation. NOTE: 1.