User's Manual

3. In the Sound Chip Configuration Program menu, the SB16 configuration screen

showing the I/O port, DMA, and IRQ settings will be displayed, and the default

settings are: I/O Port: 220, DMA1: 1, IRQ: 5. Select and set any changes or

accept the defaults.

4. In the Sound Chip Configuration Program menu, select “MPU401” to configure

the external MIDI. The Enable/Disable box can be selected by using mouse or

[space] key. If the external MIDI is enabled, the I/O port and IRQ settings will be

displayed and can be changed by mouse or [down arrow] key. The default

settings are: I/O Port: 330 and IRQ: 9. Select and set any changes or accept the

defaults.

5. In the Sound Chip Configuration Program menu, select “ADLIB” to configure

the OPL3. The Enable/Disable box can be selected by using mouse or

[space] key.

6. In the Sound Chip Configuration Program menu, select “Game Port” to

configure the game port. The Enable/Disable box can be selected by using mouse

or [space] key.

7. In the Sound Chip Configuration Program menu, select “Set Volume”. The

Setting Volume screen will be displayed. Make and set any changes or accept the

existing settings and return to the Main Menu.

8. In the Sound Chip Configuration Program menu, 8-Bit Sound/16-Bit Sound/FM

Music box will be displayed. Select each box and verify the correct operation of

the ALS4000 sound card. Follow the instructions given for each mode. If the

sound card does not operate correctly in any mode, reconfigure it by rerunning

this procedure.

9. When satisfied with the operation of the ALS4000 sound card, select [OK] to

exit the utility.

Trouble Shooting

The ALS4000 sound card is designed to run trouble free once it is

installed and set up. Most problems will be encountered during

installation and setup or will be encountered later when something is